Category: On the Grill

The Best Grilled Chicken

Chicken – especially chicken breast – is one of those things that tends to strike fear into the heart of every enthusiastic backyard griller.  Grilled chicken though, should be moist and delicious and a simple alternative to burgers and dogs.  Never fear, this fool-proof recipe can take as little as 45 minutes to prepare start to finish, and is a guaranteed crowd pleaser.

Time: 60 – 90 Minutes
Level: Easy
Cost: $6-8/plate
Serves: 4-6

Ingredients

  • 6 boneless, skinless chicken breasts
  • 4 chicken drumsticks (if you have a few people who like dark meat)
  • 2 cups plain Greek Yogurt (I prefer the original stuff, not the low fat stuff)
  • Juice of 2 lemons
  • 2 TBSP olive oil
  • Pinch saffron or saffron salt (Trader Joe’s sells a decent little jar of Saffron for about 6 bucks)
  • 1 TBSP Dijon mustard (not that yellow crap)
  • 3-4 cloves fresh garlic, minced
  • bunch fresh cilantro

Instructions

Whisk all ingredients except chicken and cilantro in a large bowl until well combined.  Marinate chicken in mixture for at least 20 minutes, or up to 1 hour.  (You can do this by dumping the chicken in a freezer bag with the marinade, tossing it in the bowl with the marinade, etc – whatever works.  The key is making sure the chicken is well coated and gets to sit with the acidity of the marinade for a minimum of 20 minutes).

Set up grill for 2-zone cooking, shooting for 400F at grate-level on the hot side.  Lightly oil grill grates to ensure chicken doesn’t stick (if it does, it isn’t the end of the world – it just means you didn’t wait long enough before trying to flip it).  Using tongs, remove chicken from marinade, shaking of the excess, and grill on the hot side of the grill until nicely charred, 7-10 minutes (discard excess marinade).  Flip chicken with tongs and repeat on the other side.  Transfer chicken to cool side of grill and allow to cook through until an instant-read thermometer registers 155F – 160F for white meat chicken, or, for dark meat chicken, shoot for 165F- 170F – if you’re doing both, give the dark meat a 10 minute head start.  Remove chicken from grill, cover with foil, and allow to rest for 10 minutes.  While chicken is resting, finely chop cilantro.  Sprinkle chopped cilantro over chicken and serve.

I like to serve this dish Mediterranean style with rice pilaf, pita bread, and hummus on the side.

Note:  The yogurt marinade is a little messy on the grill.  For this recipe in particular, I recommend leaving the grill on high or medium high while the chicken is resting to allow the excess to burn off, and then scraping down the grill grates while they are still hot.

Hack Your Gas Grill: Use it as a Smoker

If you’ve got a gas grill, you can still turn out some truly amazing, authentic BBQ.  Here’s how.

I know there are those people out there who are going to hate this post.  Trust me, I understand.  But ultimately, I’m about results – And if the technique yields sound results, then it’s a sound technique.  I have a BBQ smoker, and I love it – but most of the time I don’t have 12 or 15 hours to sit around and fiddle with a fire, and I if I can bring a 12 hour cook down to a 5 hour cook and turn out some BBQ that’s nearly indistinguishable from what I produce on my smoker, I’m down.  Also, many people may not have room for two or three cookers in their back yard (like I do).   This post is dedicated to BBQ lovers who want more of that smoke-kissed flavor in their lives.

In this post, we’ll be exploring two things:  First, how to use your gas grill as a smoker – and some of the sciencey stuff that goes on behind the scenes when using smoke.  Second, we’ll talk briefly about what types of wood to use and how.

Things You’ll Need

Grill

Smoker Box and/or Cast Iron Skillet

Wood Chunks

Stand Alone Oven Thermometer

Decent Instant-Read Thermometer

Meat

BBQ Rub (try Classic BBQ Rub, if you like).

The Key

Basically, the key to this whole thing is this:  You’ve got to learn to think of your grill as an oven.  That’s it.  Most of the time, we think of our grills as… grills.  In other words, we sear food (burgers, steaks, whatever) directly over high heat until it’s done.   We’re using primarily conduction and some convection to get heat into the food. When you roast or bake something, you’re using a little bit of convection and mostly radiation.  In other words, it’s heat in the form of waves penetrating your food.

Smoking is simply baking and/or roasting something in the presence of smoke.

I remember one Thanksgiving, the oven caught fire.  Faced with trying to figure out how to cook a 15lb turkey with no oven, I turned to my grill.  I lit one burner and plonked the bird down on the cool side of the grill and everything turned out fine, albeit a little dry.  That’s where the lightbulb went on.  Since then, I’ve developed a technique that I think is pretty damn solid.

The Technique

They say a picture is worth a thousand words, and Bon Appetit has a great picture to explain this, so I’m just going to use theirs:

grilldiagram

A:  Single Burner Lit, B:  Pan for catching drippings, C:  Smoker Box, D:  Smoke, E:  Meat

All that being said, there’s a few modifications I’d make to the picture above:

  •  Remove all but one of your grill grates so you can slide the food from hot to cold without picking it up, if need be.
  • Place the smoker box directly on the flavorizer bar (as in the cover photo for this post), NOT on the grill grate.  Basically, I’ve never been able to get anything to smoke on the grill grate – not enough conductive heat.
  • Leave the lid off the smoker box, or simply use a small cast iron pan.
  • Use wood chunks instead of chips.  Chips burn up way too fast, whereas chunks will smolder for an hour or more.  The only time I use chips is as a starting agent; i.e., place some chips down on the smoker box with a few chunks on top just to accelerate the process a bit.
  • Don’t bother to soak your wood chunks (or chips) ahead of time.  This does nothing, other than make it take longer for them to start smoking.  I’ve timed, by weight, how long it takes wood chunks soaked for 24 hours, 1 hour, and not at all, from the time they start smoking to the time they burn up, and it’s the same.  What’s not the same is the amount of time it takes for them to start smoking.  Soaking wood chunks just extends your pre-heating phase.  Trust me, don’t waste your time.
  • Do keep a trigger spray bottle handy.  Sometimes when you open the lid (which you shouldn’t do too often) a lot of oxygen will very suddenly make its way to the wood chunks and they will burst into flame.  No need to soak them – just a couple squirts to calm them down again and shut the lid… continue on your merry way.
  • Invest in a $5 stand-alone oven thermometer to place on the grill grates.  Chances are the thermometer built into the hood of your grill (if you have one) reading as much as 50F different than the actual temperature at grate-level.
  • Shoot for 275F at grate level.  Actually, anywhere between 275F and 300F is fine.  275F is my go-to temperature for smoking just about anything, even if I’m using a traditional smoker.  Many people will say that’s high, but it’s basically been proven that the only difference between 225F and 275F is the amount of time it takes to get something up to temperature (duh), but might mean more time in the presence of smoke.  However, competition BBQ teams these days are sometimes smoking brisket at north of 300F.  The reason?  Once something has been basking in smoke for more than three hours, any appreciable difference thereafter begins to fade in a damned hurry.
  • Put about an inch or so of water into the drip pan beneath the meat.  This will eliminate the possibility of any flare ups from rendered fat, and keep everything underneath the hood nice and moist.

How to Smoke Stuff:  Cooking Times and Temps

These are fairly rough – but predictable – cooking times for various meats I’ve done using this technique.  Make sure to generously season your meat with a good BBQ Rub so that there’s something for the smoke to stick to.

I always use a two-step process.  During the first phase (three to four hours) you get smoke onto the meat.  During the second phase, you finish getting the meat up to temp (190F – 205F) by wrapping it in foil.  It’s such a common practice that it actually has a name – the Texas Crutch. I won’t go into a lot of detail here, but in between the two phases you’ll meet the nemesis of every BBQ Pitmaster – the Stall.  It basically happens at about 165F for most meats and basically, for an extended period of time, your meat will just sit there and do nothing at 165F.  Wrapping your meat at this point will help speed up the process.

Pork Butt (5-7lb): About 5 hours, 3.5 hours in the smoke, 1.5 hours wrapped in foil on the grill.  Wrap at about internal temp 165F, place it back on the grill for another and pull when internal temp is 190F – 205F

Brisket (6lb):  About six hours.  Wrap at 4 hr mark (roughly 165F), finish off for 2 hrs.  Pull at 190F.

Turkey Breasts X 3 (1lb each):  About 2.5 hours.  No need to wrap in foil (i.e., “crutch”) while cooking, just pull them at 165F, wrap them up in foil with some butter and let them rest for 20 minutes.

Types of Wood to Use

BBQ wood falls into two categories:  hard woods and fruit woods.  My go-to combination is equal parts Pecan (a hard wood) and Apple wood (a fruit wood), but I also use oak, hickory, cherry, peach and mesquite.  Here’s a basic run-down on some basic types of wood and how to use them, organized from strongest to weakest flavor:

Mesquite (hardwood).  Hot temperature, fast burn time. The mother of all hard woods, mesquite has a strong, earthy, leathery flavor.  It’s really only useful for very short cooks (less than 30 minutes).  Nothing can ruin a piece of meat quicker than too much mesquite.  However, it’s quite good on lamb, burgers and roasted green chiles and other veggies.  It quickly overpowers poultry, pork, and fish.

Hickory (hardwood).  Hot temperature, long burn-time.  The most commonly used hardwood, it’s pretty safe to use on anything other than fish.  Be warned:  It makes everything taste like bacon (which is either good or bad, depending on how you look at it).

Oak (hardwood).  Hot temperature, medium burn time.  Not as strong as hickory, and slightly sweeter.  Safe for use on anything except fish.  Good for slightly longer cooks as it’s flavor is more mild.  Post Oak is the go-to in Texas BBQ, and for Santa Maria BBQ the go-to is Red Oak.  White Oak is the mildest and is slightly reminiscent of Pecan.

Pecan (hardwood).  Medium temperature, medium burn time.  Mild, sweet and yet strong enough to stand up to even the gamiest of meats.  Great on anything.  Imparts a slightly nutty flavor.  If I had to use only one wood for the rest of my life, this would be it.

Cherry (fruitwood).  Medium temperature, long burn time.  The strongest of the fruitwoods, it penetrates meat fairly quickly and imparts a rich, earthy flavor.  It also tends to turn meat dark pretty quickly.  Good on poultry and fish, and as a mixer with another hardwood.  In my opinion, it makes beef too sweet.

Apple (fruitwood).  Medium temperature, medium burn time.  My go-to fruitwood.  It takes a long time for it to penetrate meat, so it works well in combination with another hardwood.  That being said, it’s awesome on fish by itself.

Peach (fruitwood).   Low temperature, long burn time.   Probably the mildest of the fruitwoods, peach is good for cold smoking fish and cheese, but not much else, in my opinion.

Note:  Never, ever use pine or anything coniferous – the resin will ruin your grill and impart a nasty, acrid taste to everything.  The one exception to this is if you’ve got some cedar planks that you have soaked for a while, they can be used to make some damned fine salmon – but that’s a whole other technique on a whole other post.

Happy Smoking!

The Intrepid Gourmet

 

 

 

 

Seared Lamb Loin with Garlic and Lemon

Lamb tends to be one of those things that people either love or hate.  For a long time, I hated it because the only way I’d ever had it prepared was slow braised in a crockpot, stew-style, and served with mint jelly.  While that may be some people’s cup of tea, it wasn’t mine.  Then I figured out that lamb could be prepared much like steak – served medium rare.  When served like this, it has a rich, complex flavor that makes an excellent alternative to beef.

Time: 60 Minutes
Level: Easy
Cost: $8-10/plate
Serves: 4-6

This particular recipe uses lamb loins although lamb chops would work just as well.  Lamb loins look like tiny T-bone steaks – which is essentially what they are, just from a lamb instead of a cow (i.e., tenderloin on one side and strip steak on the other).  As such, they are totally delicious.  Because they’re small, they don’t have a lot of meat on them.  My boys and I can easily polish off about four; my wife will eat two.  Even still, if you can find them on special it makes for a pretty economical meal.  Also, this recipe is SUPER easy.

Ingredients

  1. 12 – 16 Lamb Loins (serves 3-4 hungry folks)
  2. 3 TBSP Olive Oil
  3. 6-8 garlic cloves (finely minced or pressed)
  4. juice of one lemon
  5. kosher salt and freshly ground black pepper, to taste.

 

Method

Consider trimming a bit of fat off the outside of the lamb loins if they’re particularly fatty.  1/4 to 1/8 inch or so is probably good.  I probably should have done that for this recipe; I will next time.  In either case, no biggy – they came out great.

Place lamb loins in large tossing bowl and add olive oil.  Toss to coat.  Add garlic, lemon, salt and pepper.  (Note:  Normally I don’t like garlic presses, but in this case I’ll usually opt to press my garlic because it’s easier than mincing them into a paste, which is really what needs to happen).  Cover and refrigerate for as little as 20 minutes or as long as 12 hours.

If preparing in the kitchen, preheat the oven to 300F.  Line a baking sheet with oven-safe parchment paper for easier clean up.  Add 1 TBSP olive oil to a cast iron or copper skillet, and heat to very hot until oil is shimmering and smoking slightly.  Sear lamb loins in batches, 2-3 minutes per side or until nicely browned.  Don’t overcrowd the pan.  Transfer lamb loins to baking sheet and bake 15-20 minutes or until an instant read thermometer reads 130F for medium-rare.  Let rest for 10 minutes before serving.

If preparing on the grill, build a 2-zone charcoal fire or alternatively, on a gas grill,  light one or two burners only.  Shoot for 300F at grate level on the cool side (don’t rely on your grill’s thermometer, spend $5 on an oven thermometer at Home Depot and place it on your grill grate to ensure an accurate reading).  Add a couple of mesquite wood chunks, if you like (mesquite is perfect for this meal because of it’s strong flavor and the short smoking time involved).

Sear lamb loins on hot side of grill with the lid open for 3-5 minutes per side or until nicely browned.  Transfer to cool side and close the lid.  Grill for 15-20 minutes or until an instant read thermometer reads 130F for medium-rare.  Let rest for 10 minutes before serving.

Remember:  In order to achieve a piece of meat that is perfect medium-rare end to end and seared on the outside (see picture) the meat needs to be the same temperature throughout when the cooking process begins.  I recommend going straight from the fridge to the grill/pan without letting it come up to temp on the countertop.  For more information see The Secret to Perfect Beef Roasts and Steaks.

Serve with steamed asparagus or green beans and rice pilaf.

Pairs well with Malbec (Argentina), Shiraz (Australia) or Red Zinfandel (California)

 

BBQ Chicken Quarters with ‘Bama White Sauce

Served with an authentic but lesser-known Alabama White Sauce, this BBQ chicken is succulent and tender on the inside with crispy, bite through skin on the outside.  Daintily eat with knife and fork, or gnaw off the bone caveman style.  Your choice.

Time: 120 Minutes
Level: Intermediate
Cost: $2-3/plate (chicken only and sauce only)
Serves: 4-6

 

I think one of the reasons people don’t like to eat chicken skin (my wife being one of these people; she pulls it off no matter what) is the general frustration associated with it.  There’s nothing worse than biting into a nice piece of BBQ chicken and having all the skin pull off all at once, dangling unattractively out of your mouth and covering your chin.  You know what I’m talking about.  This leaves eaters one of two choices:  Remove the skin and forget about eating it, or eat it by itself.

There is, however, a third option – bite through skin.  You get just want you want, nothing more, nothing less; this is the Holy Grail of BBQ Chicken – so much so, in fact, that professional competition BBQ teams will often go to great lengths to achieve it, using time consuming techniques including, but not limited to, all kinds of crazy things, like removing it, cooking it separately, and putting it back on.  Like I said, crazy.  Also unnecessary if you know the one trick in this post.

The secret to achieving bite-through skin is simply doing a reverse sear and then, during the searing process, making sure the skin has good contact with the cooking surface.  Chicken skin has a lot of fat in it, and underneath it, which is why if you sear first (especially on a BBQ grill) it’s all just going to cause flare-ups and catch fire before anything else has even had the chance to warm up.  What you’ve got to do is render 99% of the fat out of the meat before searing it, and at the last minute expose the chicken skin side down to a hot surface.  This can be done on the grill, or in the kitchen; both techniques are included here.

Ingredients

For the Chicken

  • 6-8 chicken quarters, trimmed of excess fat and skin
  • 2 TBSP (Tablespoons) olive oil
  • Classic BBQ Rub, to taste (I usually use 3-4 TBSP, click for the recipe)

For the Sauce*

  • 3/4 cup mayonnaise
  • 1/3 cup apple cider vinegar
  • Juice of 1 Lemon
  • 1/4 cup apple juice
  • 1 TBSP granulated garlic
  • 2 TBSP prepared horseradish
  • 1 TBSP coarsely ground black pepper
  • 1/2 – 1 TBSP Dijon mustard (not that yellow crap)
  • 1/4 TSP (teaspoon) Kosher salt
  • Ground cayenne pepper, just a dusting

Special Equipment

  • Bricks or a heavy cast iron griddle or skillet, for pressing chicken
  • Grill (you can do this in the kitchen, see bottom of post)
  • Disposable aluminum drip pan
  • Oven thermometer
  • Decent instant-read thermometer

How To: On the Grill

If using charcoal, build a 2-zone fire, banking the coals all to one side.  If using gas, light one or two burners only.   Toss a few wood chunks (I prefer a mixture of apple and pecan, no need to soak them first) onto the coals or into a smoker box.   Underneath the grill grates, on the cool side of the grill, place a disposable baking tray filled 1/2 – 3/4 of an inch of water; remember, a lot of fat is going to render so we want something to catch it in and cool it off immediately.  I typically remove one of the grill grates during 2-zone cooking (which, for me, is most of the time) so that I can slide the meat from one side of the grill to the other (cool to hot) without actually having to pick it up and move it around too much.

Shoot for a temperature of 275F – 300F at grate level (invest in an oven thermometer to be sure you’ve got an accurate read; even if you have a thermometer built into your grill, chances are it’s off by as much as 50F).

While the grill is coming up to temp, pull your chicken out of the fridge and place in a large mixing bowl with olive oil.  Toss to coat (you need something for the rub to stick to).  Add the Classic BBQ Rub and toss again.  (Alternatively, rub the chicken with olive oil on both sides and then rub the rub onto it, on both sides – tossing is easier).

Place the chicken on the cool side of the grill, skin side up, and cover.  Depending on the temp of your grill and how much chicken you’ve got on there, it could take anywhere between 1-2 hours to hit an internal temp of 160F, so start checking after about an hour or so.  During this time, make the sauce – simply whisk all the ingredients together in a small bowl and refrigerate.

About halfway through the cooking time (when the chicken’s internal temp is about 140F, use an instant read thermometer to test this), pour off a bit of your White Sauce into another container and head out to the grill.  Baste the chicken generously with the sauce and shut the lid.

When the chicken is up to about 160F, most of the fat should be rendered out of it, flip it over, skin side down, place something heavy on top of it to ensure good contact with the grill grates (I use a large cast iron griddle, but you could also use bricks or a heavy skillet – whatever works) and leave it to cook 10 minutes more on the cool side of the grill.  By this time it’s basically safe to eat, so you’re not going to screw anything up – we’re just perfecting the skin.  After about 10 minutes, slide the chicken over to the hot side of the grill and sear for 5 – 10 minutes.  Remove, and place on a serving platter skin side up.  Baste again with sauce.

Serve remaining sauce (the stuff still in the fridge, not what you used to baste) as a dipping sauce, if you like.

How To:  In the Kitchen

If you don’t have access to a grill, you can still make this delicious recipe in the kitchen (I’ve done it this way too, you just miss out a bit on the smokey flavor).  Begin by preheating your oven to 300F.  Fill a disposable aluminum tray with 1 inch water.  Place a cooling rack on top of that.  Place the chicken, skin side up, on the cooling rack and bake until chicken’s internal temp is about 160F.  When it hits the 160F mark, flip it over and plonk something heavy on top and return it to the oven for about 10 minutes.  During this time, heat a cast iron skillet or copper pan to very hot, over high heat.  After the ten minutes skin-side down in the oven, transfer the chicken to the skillet and brown for about 2-3 minutes, skin side down, and set aside.  Work in batches if necessary; don’t overcrowd the chicken quarters in the skillet.

Usually I’ll opt to drink a dry, crisp IPA with this meal, but the other night I drank a fairly robust Cabernet, and that was pretty good too.

Good luck!

*I would be remiss not to credit Amazing Ribs for the sauce recipe. As the author, Meathead, points out, this is just one version of what is an Alabama favorite. I’ve only modified his recipe ever so slightly. To check out his version, click here.  His version is pretty damn good too.

 

Classic BBQ Rub

 

A Classic BBQ Rub for Beef, Poultry, Pork, Burgers, and anything else…

While I am often not a fan of complex rubs and marinades – largely because I like the meat to speak for itself – this BBQ Rub is fabulous on just about anything and doesn’t detract from the flavor of anything you might put it on.  It is especially good on burgers and long-smoked chicken and pork. 

Continue reading “Classic BBQ Rub” →